Publicidad
FIG. 14
14. Determine where you want the Adjustable Shelves (E). Tap the Shelf Support (ZA) into the holes in
the Sides, with the fl at side down to support the Shelf. Attach the Shelf to the Shelf Supports with
#6x3/8" Brass Screws (ZB) through the hole in the bottom of the Shelf Support into the Shelf.
Open the Door and attach a Pad (ZE) to the back of each Door where it touches the Adjustable
Shelf.
TURN LATCH ATTACHMENT: (OPTIONAL)
15) Find the center between the top of the Face Frame and the Wooden Knobs on the Doors. Attach
the Turn Latch (ZG) to the Face Frame making sure that you center it side to side. Insert a #6x1¼"
Antique Brass Pan Head Screw (ZC) through the Turn Latch and a #8 Washer (ZK) into the Face
Frame. See FIGURE 15.
Repeat steps for lower door.
16) When you have determined the location for your unit, install the Furniture Tipping Restraint (ZL).
Carefully follow the instructions on the package.
PAGE 12 — 273W
E
ZB
FIG. 14A
E
ZA
ZK
ZG
ZC
FIG. 15
Publicidad
