Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and disinfecting
Warning!
Germs, e.g. bacteria and viruses, can remain on the mask, mouthpiece
and nebulizer after use.
• Disinfect the individual parts after use.
Medicines and substances remaining in the medication tank after use can
impair the performance of the device and result in incorrect dosing.
• Clean the individual parts of the nebulizer after each use.
Any processing other than that described in this document can damage
the thermometer
• Do not clean the device in an ultrasonic cleaner.
• Avoid automated cleaning and disinfection in a washer-disinfector (WD).
• Do not sterilize the main unit.
• Do not immerse the main unit in liquids.
• Do not expose the individual part to temperatures greater than 40 °C.
The use of chemicals can damage the thermometer or harm the user.
• Please note the instructions and warnings for the cleaning and disinfectant
agent of the respective manufacturer.
• If necessary, wear disposable gloves and protective goggles during pro-
cessing.
• Do not use strongly acidic or alkaline cleaning agents.
• Do not use solvents (e.g. acetone, benzene etc.).
Cleaning after each use
Following the cleaning instructions after each use will prevent any remaining
medication in the bottle from drying resulting in the device not nebulizing ef-
fectively and will help prevent infections.
Manual cleaning
Make sure that all surfaces are accessible for cleaning. To this end, disassem-
ble the nebulizer by disconnecting the mask, mouthpiece and air tube from the
nebulizer and carefully turn and lift the inhalation cover counter-clockwise. Then
remove the nebulizer cone.
If necessary, dispose of any remaining medication or liquids in the medication
tank.
31
EN
Publicidad
