Product Description - Novoferm tormatic T100 DES Manual De Instrucciones Y De Montaje

Control de portón

Ocultar thumbs Ver también para T100 DES:

Instrucciones de montaje y de manejo (56 páginas)

100

101

102

103

104

105

106

107

108

109

110

111

112

Tabla de contenido

Idiomas disponibles

Foreseeable misuse

Any use other than described in chapter Intended use is regarded

as reasonably foreseeable misuse. This includes but is not limited

to:

•

the use on overhead or sliding doors.

Any damage or injury as a result of reasonably foreseeable mis-

use or of not following the assembly and operating instructions

will render the manufacturer's liability null and void.

Personnel qualifications

The following persons are qualified to perform assembly work and

to work on the mechanical system (troubleshooting & repair):

•

Skilled workers with relevant training, e.g. industrial

mechanic

A skilled worker is a person who, due to his/her professional train-

ing, his knowledge and experience as well as due to his/her

knowledge of the relevant regulations, is able to judge the work

assigned to him/her as well as to identify possible hazards.

The following persons are qualified to perform electrical installa-

tion work and to work on the electrical system (troubleshooting,

repair & deinstallation):

•

qualified electricians

Skilled electricians must be able to read and understand electric

circuit diagrams, to put electrical systems into service and to

maintain them, to wire control cabinets, to install the control soft-

ware, to ensure the functionality of electrical components and to

identify possible hazards resulting from handling electrical and

electronic systems.

The following persons are authorized to handle the product:

•

Operating personnel

The operator must have read and understood the instructions, in

particular the "Safety" chapter and must be aware of the hazards

associated with handling the product and the controlled door sys-

tem.

The operator must have been instructed with regard to handling

the controlled door system.

Dangers which may be posed by the product and the

controlled door system

The product has undergone a risk assessment. The product's

design and construction, which are based on this risk assess-

ment, correspond to the current state-of-the-art. The product is

safe to operate when used as intended. Nevertheless, residual

risks remain!

Hazardous voltage!

DANGER

Fatal electric shock when touching live parts. Ob-

serve the following safety rules when working on

the electrical system:

•

Disconnect from the mains.

•

Secure against inadvertent switch-on.

•

Verify de-energised state.

•

Work on the electrical system may only be

performed by skilled electricians or instruc-

ted persons working under the direction and

supervision of a skilled electrician in accord-

ance with the electrotechnical rules and dir-

ectives.

Crush hazard and risk of being struck by the

CAUTION

closing door

Persons can be struck when the door is closed

or collide with the door.

•

The door must be visible from the place of

operation.

Safety devices and protective systems

•

Emergency stop switch

By means of the emergency stop button connected, the

movement of the controlled door system is stopped.

How to respond after the emergency

•

Emergency stop switch

If an emergency stop switch has been connected by the

customer, you have to unlock it according to the

manufacturer's information after having resolved the

emergency.

Further safety devices such as light grids, photoelectric sensors

or safety edges can be connected. The personnel must be in-

structed with regard to the exact configuration and its function.