MSW Motor Technics MSW-AVR 8500F MAX EURO5 Manual De Instrucciones página 43

1. Ignition switch ON/OFF (on/off)
2. Starter button
3. Emergency stop button
4. Low pressure / oil level indicator
5. Voltage indicator
6. Overcurrent circuit breaker
7. 1-phase socket 230V
8. 400V 3-phase socket
9. Connection of an external grounding electrode
10. 12V output fuse socket
11. 12V pole outputs
12. Ignition lock with starter
13. 230 / 400V socket switch
14. Device control panel
15. Input to the ATS controller (optional)
3.3.3 STARTING THE ENGINE
a) Make sure that the circuit breaker (6) is in the "ON" position.
b) Recoil starter (selected models):
Turn on the ignition - set the switch (1) to the "ON" position.
•
• Set the throttle lever to the RUN position (see the picture
below):