Descargar Imprimir esta página

MSW Motor Technics MSW-AVR 8500F MAX EURO5 Manual De Instrucciones página 50

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 152
Let the machine cool down completely.
Drain the fuel from the tank.
Remove the bands on the ends of the fuel hoses on both sides of the
filter.
Remove the filter from the hoses (turn the filter right/left - do not pull
forcefully)
Rinse the disassembled filter in fresh diesel fuel or replace it with a
new one if necessary.
o) Storage/extended downtime:
Run the machine without load for 3 minutes.
When the oil is still warm but not fresh, replace it with a new
one.
Add a few ml of fresh engine oil to the combustion chamber
(removing the plug on the cylinder head).
(only for engines with a recoil starter) press the decompression
lever (see the picture below - in closed models, access after
removing the top cover in the housing) and simultaneously pull
the starter lever 2-3 times.

Publicidad

loading