Probuilder 49008 Manual De Instrucciones página 54

If you subsequently want to remove the dust
extraction hose, press the lock (a) using the
provided screwdriver (16) and pull the hose
and adapter (13) apart.
Loosen the connector (1) on the wall and
ceiling sander by turning it anticlockwise.
Insert the adapter (13) that is � tted to the
dust extraction hose (14) into the connector
(1). Secure the connector to the adapters by
turning it clockwise.
54
Alternatively you can insert the telescopic
shaft (12) into the connector (1) in order
to extend the shaft to the required length.
Then attach the dust extraction hose to the
connector on the telescopic shaft (12).
Connect a vacuum cleaner to the other end
of the dust extraction hose.
Check that the bag in the vacuum cleaner is
suitable for the task. Change if necessary.