Probuilder 49008 Manual De Instrucciones página 55

Use
Take hold of the wall and ceiling sander tube
with one hand and the handle with the other.
Set the sander to the required speed on
the speed selector (8). First switch on the
connected vacuum cleaner and then turn on
the wall and ceiling sander by pressing the
on/off button (9). Press the lock button (10) if
you want to have the wall and ceiling sander
run continuously. Press the on/off button
and release it again to switch off continuous
operation.
Place the sanding head against the wall or
ceiling so that the brush edge (3) touches
the surface all the way round. Now press the
sanding head lightly against the surface and
move it back and forth using a sweeping
motion.
Do not press the sanding head too hard
against the surface, and keep it moving all
the time to avoid making deep grinding
marks in the surface.
The sanding head can move at all angles in
relation to the tube, so it is not necessary to
change your work position in order to sand
at diff erent heights or angles.
Switch off the wall and ceiling sander by
releasing the on/off button.
Sanding ceilings
To sand ceilings, attach the sanding head (4)
with a lock pin (20) (included).
Work light
If you need the working area to be
illuminated, you can switch on the work light
(19) using the on/off button on the side of
the work light.
GB
55