OPERATION INSTRUCTIONS
Instructions of indicator lights
TURBO
Power indicator: After plugging in, the power indicator shows green whether
the machine starts working or not.
Water-full indicator: When water tank is full, it shows red and the unit will
bizz for 5 times. At that time, the machine stops and all the buttons are locked
unless users empty and recover the water tank.
Timer indicator: When timer function is working, the indicator light shows
green.
Sleep indicator (Low fan speed): It shows green when the unit is running in
low fan speed.
Turbo indicator (High fan speed): It shows green when the unit is running
in high fan speed.
Drying clothes indicator: It shows green when the drying clothes function is
working. At that mode, the compressor works continuously without the
influence of the room humidity. High fan speed is fixed and the humidity can't
be adjusted.
Clean filter indicator: After the accumulated running time reaching over 600
hours, this indicator will show red and the unit will bizz for 20 times to warn
the user to change the filter. At that time, all the buttons are locked, the
compressor stops and fan closes 60 seconds later. If user wants to cancel this
warning, press the power button for 5 seconds, then the fan running time
resets to 0.
Display: It has 3 functions as below:
1. When the power is on, it shows the room humidity;
2. When users adjust humidity, it shows the set humidity data;
3. When users set the timer on/off, it shows the timing data.
52