Publicidad
Idiomas disponibles
Idiomas disponibles
Steps:
Securely and properly connect the drain hose and make sure it is not kinked and
clear of obstruction.
Place the outlet of hose over a drain or bucket and ensure that water could
freely flow out of the unit.
Do not submerge the end of hose into water; otherwise it can cause "Air Lock"
in the hose.
To avoid water spillage:
As the negative pressure of condensate drain pan is large, tilt the drain hose downward toward the floor.
It is appropriate that the degree of inclination should exceed 20 degrees.
Straighten the hose to avoid a trap existing in the hose
Caution:
1. Never block the water outlet or the pipe, water will flow into the water tank if it is blocked.
2. Never bend the drainage pipe and be always slower than the outlet.
3. Must close the cover when no need continuous drainage.
Remove the plastic of the water outlet port, then insert
one side of drainage pipe into the hole of water outlet,
and put the other side to a specific location.
Drain hose
(inner diameter =11mm)
57
Publicidad
