Publicidad
Idiomas disponibles
Idiomas disponibles
Drying Operation
Press POWER key to turn on the unit.
Press the MODE key to activate the continuous drying mode.
The unit starts to dehumidify in continuous operation, regardless of the humidity. The humidity set-point cannot
be adjusted in this mode.
Press the MODE key again to deactivate the continuous drying mode.
Note: For continuous operation the drain hose should be connected in order to continuously drain the collected
water.
Set Humidity (setting range: 20%-90%):
The humidity set-point can be adjusted in normal operation.
Press ADD/MINUS key repeatedly to adjust humidity set-point by increments of 5%.The unit will cycle on and
off to maintain the level.
Set the humidity level between 40% and 60% for comfort.
Set Fan Speed:
Press Fan key to switch the speed between Turbo and Sleep.
Note: The fan speed cannot be set when in defrosting progress.
Timer Setting（0 hour-24hours）:
The timer has two ways of operation:
To turn off
(When power on)
To turn on
(When power off)
Cancel timer
Press Timer key to activate the timer function then press
ADD/MINUS until shows "00", the Timer LED turn off.
Note: when press POWER will also exit the timer setting.
Water FULL Indicator
The machine automatically shuts off once the water tank is full, alerting the user through an indicator light and buzzing for
15 times. It reminds you to check:
If the water tank is full, empty and re-install the water tank.
If the water tank is not in position, the full indicator always on and the unit is inoperative.
Re-install the tank correctly, and the unit will auto operating as your last setting.
Press Timer key to
turn on the timer
function.
Press Timer key to
turn on the timer
function.
Press ADD/NIMUS
repeatedly to set the
delay OFF time.
Press ADD/NIMUS
repeatedly to set the
delay ON time.
54
Publicidad
