WOOD'S AD Serie Manual Del Usuario página 15

Troubleshooting
I you are having trouble with your Wood's product, please reer to the below troubleshooting.
I nothing o the below works, please contact your retailer or servicing o your product.
Trouble Cause
The unit Is the power cord connected?
doesn't work
Is the room temperature over 35°C
or below 5°C?
Is ambient humidity level below set value?
The unit Is the lter blocked?
doesn't start
Is the air inlet or air outlet jammed?
No air inlet Is the lter blocked?
Abnormal noise Is the unit inclined?
Is the lter blocked?
Error code C1 Is the room temperature above
50°C or below 0°C?
Malunction o derost sensor
Error code C2 Is the room temperature above
50°C or below 0°C?
Malunction o humidity or
temperature sensor
Error code C8 Rerigerant leakage
This marking indicates that the product should not be disposed of with other household waste throughout the EU. To prevent
damage to the environment and people from uncontrolled waste management, recycle the product responsibly to support
the sustainable reuse of resources. To return the product, please contact your dealer..
English
Solution
Connect the unit to a power outlet
Increase or decrease
room temperature
Decrease set value or choose
continuous dehumidication
Clean or replace the lter
Clear the blockage
Clean or replace the lter
Move the unit to a fat and solid
ground
Clean or replace the lter
Increase or decrease
the room temperature.
Contact your retailer
Increase or decrease
the room temperature.
Contact your retailer
Contact your retailer
15