Cebora 392 Manual De Instrucciones página 35

5 TECHNICAL SPECIFICATIONS
This equipment complies with standards IEC 61000-3-12 and IEC 61000-3-11 provided that impedance of the
supply line in the PCC is less than Zmax shown in the table. The fitter or the unit user are responsible for ensuring,
consulting the distribution network operator if necessary, that the equipment is connected to a power supply with a
maximum system impedance lower than Zmax.
The tables in section 11 show the technical data of welding power sources for the two processes used in the field of
industrial automation, which are the MIG/MAG processes. When in manual mode, the power sources are able to weld
using also coated (MMA) and TIG electrodes. For more details, refer to the instruction manual.
Mains voltage (U1)
Mains voltage tolerance (U1)
Mains frequency
Mains fuse (delayed action)
Power consumed
Mains connection Zmax
Power factor (cosɸ)
Welding current range
Welding current 10 min/40°C (IEC 60974-1)
Open-circuit voltage (U0)
Max. gas inlet pressure
Performance
Consumption in an inactive state
Electromagnetic compatibility class
Overvoltage class
Degree of pollution (IEC 60664-1)
Degree of protection
Cooling type
Working temperature
Transport and storage temperature
Marking and Certifications
Dimensions (WxDxH)
Net weight
3301278
SYNSTAR TRIPLE 200M (Item No 392)
MIG
1x230 V
+15% / -20%
50/60 Hz
13 A
6.3 kVA 20%
3.8 kVA 60%
3.1 kVA 100%
33 Ω
0.99
20 - 200 A
200 A 20%
140 A 60%
120 A 100%
96 V
6 bar / 87 psi
> 85%
<50 W
A
III
3
IP23S
AF
-10°C ÷ 40°C
-25°C ÷ 55°C
CE UKCA S
588 x 950 x 1750 mm
102 kg
35/37