Optika Italy B-510 Serie Manual De Instrucciones página 10

4. Screw each objective into the thread of the nosepiece,
clockwise with increasing magnification. (Fig. 5)
5. Insert the microscope power supply jack in the connector
placed at the rear side of the microscope. (Fig. 6)
6. Plug the power supply to the wall outlet.
7. Plug the USB mouse receiver in the "USB MOUSE" port Ⓐ
on the camera. (Fig. 7)
8. Connect the cable with the HDMI side ① to the provided HD-
MI-HDMI L-adapter ②. (Fig. 8)
9. Connect the HDMI L-adapter to the "HDMI" port Ⓑ on the
camera.
Page 10
Ⓐ
②
Ⓑ
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
①
F ig. 8 F ig. 8