Renfert SILENT powerCAM TC Guia De Inicio Rapido página 13

Introduction
This Quick Start Guide contains instructions on the operation of the unit and rele-
vant safety information.
Detailed information about the unit is provided in the instructions for use, which
you can download from our website at www.renfert.com/p915.
Enter the following item number: 29380000.
Symbols used
Symbols with the following meanings are used in these instructions or on the equipment:
Danger
Immediate danger of injury. Consult accompanying documents!
Electrical voltage
Danger due to electrical voltage.
Caution
Risk of damage to the equipment if the instruction is not followed.
Notice
Provides the operator with useful information that eases use.
The equipment complies with applicable EU directives.
This product complies with the relevant UK legislation.
See UKCA Declaration of Conformity in the Internet under www.renfert.com.
The equipment is subject to the provisions of the EU directive 2002/96/EC (WEEE directive).
Other symbols are explained as they occur.
Safety
Intended use
This extraction unit is intended for use with dental milling machines for the suction of dry dust, generated
whilst milling commercially available milling blocks and blanks.
The unit is intended for commercial use only.
The intended use also includes compliance with the instructions specified by the manufacturer concerning
operation and maintenance.
Improper use
Flammable, easily combustible, hot, burning, or explosive materials may not be suctioned using the unit.
It is not permitted to suction liquids.
This unit is not intended for private, household use.
Any use other than specified in these instructions is deemed improper use.
The manufacturer shall not be liable for resulting damages.
Only spare parts and accessories supplied or authorized by Renfert GmbH may be used with this prod-
uct. If other spare parts or accessories are used, this could have a detrimental effect on the safety of the
equipment, increase the risk of serious injury and lead to damage to the environment or the product itself.
Hazard and warning information
General information
► If the unit is not used in accordance with the supplied instructions for use, the intended safety can
no longer be guaranteed.
► The unit may only be operated using a power cord equipped with a plug appropriate to the local
power supply. Any necessary modifications must be carried out by a qualified electrician.
► Only operate the unit if the information on the nameplate corresponds to the specifications of
your local mains power supply.
After removing the dust drawer, you can find the nameplate inside the unit on the lower left side.
► The unit may only be plugged into electrical sockets that are connected to the protective conduc-
tor system.
- 1 -
en