Master MT Pocket Manual De Uso Y Mantenimiento página 23

Attach the collection bag to the machine from the bottom and
2
attach it using the Velcro fastener.
Checks to carry out before starting work
Make sure that the grid you want to work with is in place and that it is well attached and fixed to the machine. Make
sure the latches on the grid are secure.
Operating the machine
Master Products distributes a cut-off mechanism that must not be altered by the consumer. If any task is carried out
on the machine, be it, for example, maintenance, regulation, adjustment, etc. tasks, it is essential to comply with the
safety regulations indicated in the Safety for the Operator section.
Raw material conditions
The MT Pocket machine was designed to work with all types of fresh herbaceous and semi-woody plants. Any materials
not of this nature must not be processed.
Preparation of the raw material
To be able to work with the MT Pocket it is important to leave a part of the lower branch free to be able to grasp it with
the glove and work comfortably and safely.
Finally, connect one end of the power cable (D) supplied to the
3
connector enabled on the chassis of the machine, and the other
end to the electricity supply.
IMPORTANT: Make sure that the electrical wiring is perfectly
positioned, without forming loops that could cause tripping.
www.masterproducts.es
23