Master MT Pocket Manual De Uso Y Mantenimiento página 31

Loosen the set screw shown in the following image with the help of an Allen key Nº 2.5, so that it exerts less pressure on the shaft,
4
without losing contact.
IMPORTANT: The machine must be stopped and disconnected before manipulating it.
Replace the grid on the upper part, fastening it with the three latches. Adjust the height of the blade and the shaft, inserting an Allen key
5
Nº 3 into the central screw of the shaft through the hole in the grid.
To lower the blade, screw in the central screw, and to raise it unscrew it until the desired position is obtained.
6
www.masterproducts.es
31