Clarke FOCUS S28 Manual Del Operador página 31

MACHINE CONTROL PANEL L28, L33 & L38
Circuit Breakers (See Figure #2, Item "L", "M", "N")
The circuit breaker reset buttons are located on the control panel. The breakers are located as follows:
"M" - Brush Motors (35A); Item N - Key Switch (5A).
If a circuit breaker trips, determine which motor is not operating and turn the key switch "OFF". Wait five minutes and
push the reset button back in. Turn the key switch "ON", and try again. An authorized service person should be
contacted if the breaker trips again.
F
Clarke ®
Operator's Manual - FOCUS S28/L28/S33/L33/S38/L38 WB
G
E
D
C
L K
N M
Figure #2
B
J H
I
EN
Item "L" and
F
A
- 31 -