Publicidad
Idiomas disponibles
Idiomas disponibles
4.5 Mounting side panels
Steel side panels
Fig. 10
Fig. 11
Fig. 12
1.
If rear outlet: Use proper tool to remove the cover
plate (Fig. 10 A) in the side panel (Fig. 10 B).
2.
Lift the side panel and lower it over the bolts (Fig. 10 C
and Fig. 12).
3.
Mount the other steel side panel the same way.
Fig. 11
A
1.
Mount the pins (Fig. 11 A) and the clips (Fig. 11 B).
2.
Join the two side panels together using a clip (Fig. 11 C).
3.
If rear outlet: Mount an extra clip in the lower part of
the opening (Fig. 11 D).
B
A
C
C
C
B
D
Fig. 12
1.
Mount the nuts from inside of the base.
Fig. 13
1.
Place the top plate (Fig. 13 A), air grate (Fig. 13 B) and
bowl (Fig. 13 C).
If soapstone top:
Fig. 14
1.
Replace the screws with bolt and nut (fi g. 14 B) provided.
2.
Place the soapstone top (Fig. 14 A) on the screws
(Fig. 14 B) and the guiding warts (Fig. 14 C).
3.
Adjust the screws (Fig. 14 B) until the soapstone top is level.
4.
Place the steel cover (Fig. 14 D).
ENGLISH
C
B
A
D
A
C
B
9
Publicidad
