Helo HNST1 Instalación Y Manual De Uso página 44

User and installation manual HNS-T1
Specifications
Operating voltage
Output options
Generator dimensions
Parallel coupling
Enclosure class
Installation
Water tank material
Water tank pipes
Weight when empty
Automatic flushing one hour after switching off
Interim rinsing during use
Electric water level adjustment
Electric overfill protector
Calcium repelling, self cleaning electrodes
Overheating protector
Safety valve
Digital control panel, Helo T1
Easy maintenance
Replaceable heating elements (3 pcs)
The steam generator has an overheating protector equipped with a reset button.
Fill cap for deliming agent (citric acid) is located on the lid of the steamer.
Components easily replaceable, circuit board, heating elements, surface sensor.
Accessories
- Scent pump, (Essence pump kit 0038130)
- Scent pump canister 20 l (0038132)
- Automatic flush and rinse cycle. (Automatic drain valve 4310130)
- Steam nozzles (3.4 – 6.0 kW 1 piece, 7.7 – 9.5 kW 2 pcs, 12 – 14 kW 3 pcs) (7819604)
General
HNS-Touch steam generators are only intended for use in heating spa facilities. Using steam generators in other
areas than steam rooms can damage the building's structure.
The manufacturer is not responsible for damages caused if the unit has been used incorrectly or in a manner for
which the unit was not designed for.
Water and steam pipe connections must be made prior to connecting the unit into the mains.
Due care and attention must be taken when making the connections. Proper sealing must be ensured for all
extensions. A good extension must have at least taped over threaded connections, but it is recommended that
connections are soldered.
Testing the water before using the steam generator.
The test packet that comes with the steamer includes test slips, which can be used for testing the water hardness
number as follows:
Dip the test slip in water for about 1 second, take it out and shake off the excess water. After a minute, compare the
colour code appearing on the test slip with the code key in the packet.
All manuals and user guides at all-guides.com
230V – 240V 1N~ / 2~,
230V 3~,
400V – 415V 3N~
3.4 / 4.7 / 6.0 / 7.7 / 9.5 / 12.0 / 14.0 kW
520 x 380 x 160 mm
See the connecting instructions for parallel coupling of
several generaors
IP 20
Floor/wall
Aisi 304, stainless steel
Aisi 314, stainless acid-proof steel
about 11 kg
(optional, Automatic drain valve)
(optional, Automatic drain valve)
3
(3.4 kW – 7.7 kW)
(3.4 kW – 14 kW)
(3.4 kW – 14 kW)