EDM Product 07681 Manual De Instrucciones página 21

Instrucciones importantes de seguridad / instruções importantes de segurança
Ref. 07681
Important safety instructions
DRY IRONING
For ironing without steam, follow the instruction in section "steam ironing", however, the
steam control turning knob should remain in position "OFF" (no steam).
A special filter inside the water tank softens the water and prevents scale
build-up in the soleplate. The filter is permanent and does not need replacing.
Note:Use tap water only. Distilled and demineralized water makes the anti-calc
system ineffective by altering its physicochemical characteristics.
ANTI-DRIPPING SYSTEM
This iron is equipped with drip stop function: the iron automatically stops
steaming when the temperature is too low to prevent water from dripping out
of the soleplate.
With the anti-dripping system, you can perfectly iron even the most delicate
fabrics.
HOW TO CLEAN AND STORE
- After using, lift the iron with the filling hole downwards to empty the
remaining water from the Water tank.
- Insert the plug into the socket, and set the Temperature Control Dial to "MAX"
for 1-2 minutes to evaporate the remaining water, and then unplug the iron
and let it cool down before storing it.
ATTENTION:
When the plug connecting with the power socket, the user is not allowed to
leave.
When the power cord is damaged, contact your dealers or an authorized
service center for repair.
In case of any repairs, replacement of cord or plug, or adjustment, please
consult a qualified technician, or take appliance to an authorized service
facility.
-6-