Publicidad
Idiomas disponibles
Idiomas disponibles
6. Usage
Making ice cubes
•
Open the lid of the appliance and remove the ice-collector.
•
Fill the ice cube maker with water. Ensure that you do not exceed the maxi-
mum mark. Use only drinking water without additives for making ice cubes.
Note: As far as possible, use water with a temperature of 8°C to 25°C.
Then replace the ice collector and close the lid of the appliance.
•
Then press the "ON/OFF" button to start the appliance. The freezing
process takes approximately 7 to 15 minutes. Initially, the ice cubes may
still be slightly small.
Note: Due to the rapid freezing process, it may happen that the ice cubes appear
slightly milky. The air trapped in the water can get into the ice cube. However, the
air does not affect the quality of the ice cube.
The
appliance
(the LED "
" starts glowing). The process continues if enough ice cubes are tak-
en out or they melt. The ice cube maker stops when there is no water in the water
tank. The LED "
by pressing the "ON/OFF" button. The "ON/OFF" LED display stops glowing.
7. Cleaning and Care
To retain the fresh taste, we recommend you to clean the ice cube maker once a
week if you are using it regularly.
•
Stop the ice making cycle by pressing the "ON/OFF" button. Then discon-
nect the plug from the socket and allow the appliance to return to room
temperature.
English
pauses
automatically
" then starts glowing. You can stop the appliance manually
when
the
collector
is
full
33
Publicidad
