Publicidad
Idiomas disponibles
Idiomas disponibles
DE
3.5 Electrical connection
EN
In order to ensure the safe and trouble-free operation of the device, the following instruc-
FR
tions must be observed for the electrical connection:
•
Connect the appliance to a properly installed power outlet with electrical data corre-
IT
sponding to the rating plate's specifi cations.
•
The connection between the device and the electrical network may employ a 3 meter
ES
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fi re that is involved with this.
NL
•
Do not bend the power cord. Place the power cord in a way so that you do not trip
over it. Make sure that the power cable is undamaged and has not been installed
RUS
under or over hot or sharp surfaces.
•
SE
This unit is not designed to be installed in an RV or used with an inverter.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
PT
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house instal-
lation checked over by a qualifi ed electrician. The manufacturer cannot be made
responsible for damages that are caused by a missing or damaged
protective conductor.
•
Options to connect the power cord:
In case you have a ground socket below the device use this
to plug in. Alternatively you can use a wall socket. In this case
make sure that the power cord is placed carefully to avoid
stumble, by placing under a carpet or by using the included
cable channel (K).
DANGER
The mains plug must be plugged fi rmly into the connection socket on the bottom of
the device, otherwise there is a risk of fi re.
28
CASO Sound & Cool
K
Publicidad
