CASO DESIGN Sound & Cool Black Manual Del Usuario página 31

5.
Press the ( ) button to change the temperature in the left compartment. You can
select temperatures from 3 to 8 °C.
6.
Press the ( ) button to change the temperature in the right compartment. You
can select temperatures from 6 to 12 °C. You can also switch off the right refrigerated
compartment by setting it to „OF".
7. The current temperature setting that saves the most energy is set by pressing the
( ) button. This setting depends on the ambient temperature of the unit.
8.
The setting is automatically confi rmed after a few seconds. To make new settings, the
( ) button must be activated again by double-tapping it.
9.
When you open a drawer of the unit, the currently set temperature is shown in the
display.
PLEASE NOTE

When used for the fi rst time, it can take up to 24 hours until the operating tempera-
ture is reached.

The unit will beep and fl ash red when the drawer has been open too long to remind
you to close it.

Allow the unit to operate for 2 hours before placing food/beverages/wine in it.

The device was tested assuming the cooling areas serve as pantry compartments.

Deviating low temperatures, i.e. those designed for long periods of time, may
increase power consumption.

The glass surface has a load capacity of max. 200 kg.
5.2 Instructions for storing food/beverages in the unit
•
Do not store food/beverages in the appliance that easily spoil at low temperatures.
•
Do not place hot food / beverages into the device. Let them cool down before placing
into the device.
•
Bottles have to be tightly placed to prevent them form tilting when the drawers are
opened.
•
The partions of the drawers can be removed and the inserts can be move, to store
diff erent types of food.
•
The left and right refrigerated compartments can be controlled independently. Ad-
just the temperature to the respective food.
•
Do not overfi ll the device so that the internal air circulation is not intered.
5.3 Soundbar setting via Bluetooth
1.
Activate the music setting by double-tapping the (
2.
Search for the device „T-BAR" in your smartphone/tablet under the Bluetooth set-
ting and connect to the unit.
3.
If your phone requires a pairing code, enter 0000.
4. After a successful connection, the soundbar works as an external speaker for your
smartphone/tablet and you can play your desired music.
5.
Make sure that the (
smartphone/tablet.
6.
Use the ( ) and (
7.
The setting is automatically confi rmed after a few seconds. To make new settings,
the ( ) button must be activated again by double-tapping it.
) button is not activated, and increase the volume on your
) buttons to adjust the volume of the unit.
) button.
CASO Sound & Cool
DE
EN
FR
IT
ES
NL
RUS
SE
PT
31