Publicidad
Idiomas disponibles
Idiomas disponibles
RUNNING
ES
▶The iron must not be left unattended while it is connected to the
mains.
▶The plug must be removed from the socket before the water tank
PT
fills with water.
▶The filling opening must not be opened during use.
▶When placing the iron on its stand, make sure that the surface on
EN
which it is placed is stable.
▶The iron should not be used if it has been dropped, if there are visible
signs of damage, or if it is leaking.
FR
▶If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person to
avoid a hazard.
NOTE
• This appliance is for domestic use only. Use the iron only for its
intended use.
• Check the voltage of the iron if it is the same as your home.
• To avoid a circuit overload, do not use another high voltage
appliance on the same circuit.
• Do not let cord touch hot surfaces. Let the iron cool completely
before putting it away.
• To protect against risk of electric shock, do not immerse iron in
water or other liquids.
• Keep the cord away from the hot base of the iron.
• Always keep the instruction manual.
IRON PARTS
1. Steam button
2. Water inlet cover
3. Lamp cover
4. Open the cover
5. Thermostat wheel
6. Cable cover
7. Top water cap
8. Switch 110-120V / 220-240V
Instruction manual
9. Back cover
10. Steam control
11. Glass
12. Push button
13. Body
14. Heat resistant base
15. Sole
HOW TO USE
▶Remove any labels or stickers that may be attached to the body or
▶When used for the first time, the iron may emit an odor. This will
FILLING WITH WATER
▶Remove the mains plug from the wall socket before filling the iron.
▶Move the steam control lever all the way to the left. The lever should
▶Pour distilled water with the glass that contains the box through the
▶Close the water inlet cap firmly.
TEMPERATURE SETTING
▶Place the iron on its heel and plug in the power cord. Once the light
▶Use this table as a guide for temperatures to suit the type of
▶The temperature light indicates that the soleplate is heating up.
soleplate of the iron before first use.
cease after a short time.
Make sure it's cold.
indicate the symbol that resembles a steam explosion with a line
through it.
inlet until it reaches the "Max" mark (maximum fill) of the internal
tank.
comes on, indicating that the iron is receiving power.
KNITTING
Nylon/acrylic/acetate
Silk/rayon/polyester
Cotton
Linen
material.
ref. 07305
TEMPERATURE ADJUSTMENT
·
··
···
MAX.
Publicidad
