Astralpool Guardian Pool NN Manual De Instalación página 13

•
Alarm relays setting
Figure 5 Date and time
There are two alarm relays and they are assignable:
- ALARM RELAY ASSIGN: Choose the measure at which to assign the relay; it is possible to choose
between: all measures, Combine Chlorine Setpoint or Turbidity Setpoint.
- ALARM RELAY STATUS: It allows to choose the normal status of the relay:
NO (Normal Open)
NC (Normal Closed)
- ALARM RELAY DELAY (SEC): Choose the time (second) after which the relay changes its status.
3.1.2 FACTORY SETTINGS
This window is protected by password. The explanation is in the appendix.
3.1.3 FLOW
There's two states:
- ON: when there is flow.
- OFF: when there is not flow.
0000138319 Rev. 3.2
Astralpool multiparameter
USER MANUAL
11