Boneco S250 Manual página 27

HANDLING
CONTROLLING HUMIDITY
The BONECO S250 is equipped with a hygrostat that
continuously monitors the humidity in the room
and regulates the unit's operation. The adjustable
range is between 30% and 70%.
If the water tank is empty, automatic shut-off pre-
vents the appliance from overheating or becoming
damaged.
1. Switch on the BONECO S250.
2. Use the and buttons to set the desired
humidity. The display shows the note
("desired").
3. A few seconds after the last input, the display
changes back to . The display now
shows the current humidity again.
The BONECO S250 stops humidification once the
desired value is reached. Humidification continues
automatically as soon as the set value is no longer
met.
REGULATING OUTPUT
The performance of the BONECO S250 is regulated
in two levels.
1. Press the button to switch between the two
performance levels.
The selected level is shown on the display by the
symbols ("High") and ("Low").
The selected level does not affect the measurement
or the control functions of the hygrostat.
27
en