Publicidad
Idiomas disponibles
Idiomas disponibles
SaunaP
UR
5.
Operation
LED SaunaP
bathing
UR
operation
activated/deactivated
77 segment display
SaunaP
Starting/ending the form of bathing
5.8.
Internal display with SaunaP
The internal display with SaunaP
papers for the items included in delivery.
Function
The internal display with SaunaP
d
showing the SaunaP
d
showing the operating values during sauna operation
d
starting/ending the SaunaP
Starting the SaunaP
UR
.
Requirement: Setpoint temperature must be reached. The
'
Start sauna operation if required, see chapter 5.4.
.
It is possible to start the SaunaP
display (optional).
Press the SaunaP
1.
UR
.
If
appears in the 7 segment display, wait until the temperature for the SaunaP
bathing is reached. Then try again.
.
During the SaunaP
UR
.
After approx. 20 minutes or when the temperature falls below the set temperature difference of
approx. 15K, the SaunaP
again.
Ending the SaunaP
form of bathing
UR
Press the SaunaP
1.
UR
.
The
SaunaP
operating mode LED goes out. The sauna heater starts heating again.
UR
5070178/07.02
button.
UR
Temperature for the SaunaP
button can be delivered as an optional feature. Refer to the delivery
UR
button is used for
UR
operating mode
UR
form of bathing.
UR
form of bathing
form of bathing on the control unit or on the internal
UR
button
.
form of bathing the
SaunaP
form of bathing ends automatically. The sauna heater starts heating
UR
button
.
Sauna actual temperature
form of bathing not reached yet
UR
button (optional)
UR
symbol must appear in the display.
operating mode LED shines.
UR
The four digit 7 segment display
shows the following information
alternately:
Sauna time
Program end
form of
UR
PAGE 13
Publicidad
