Publicidad
Idiomas disponibles
Idiomas disponibles
Connect to a Wired (Ethernet) Network
Note:
•
This function may not be applicable in some models/countries/regions.
To get access to the Internet using a wired connection, it is recommended to use a modem or router that
supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically
provide the IP address, netmask, gateway, DNS Server 1 and DNS Server 2, so you do not have to enter
them manually. Most home networks already have DHCP.
See the illustration below.
After connecting to a wired (Ethernet) network:
>
Settings > Network > Network Configuration
Set the TV network by selecting Network Configuration and press
•
Connection Type
Choose a wired (Ethernet) network connection to access the Internet.
•
Ethernet
Display network status.
•
IP Settings
Configure the IP setting for your network connection.
Related information
Network
on page 37
Network Issues
on page 60
My TV cannot connect to the network.
Connect to a Wireless Network
To connect to an available wireless network, make sure that you turn on your wireless router and have the
wireless router's SSID and password before attempting to connect.
To get access to the Internet using a wireless connection:
First-Time Use
on page 53
5
button to enter the submenu.
Publicidad
