Buchi I-300 Manual De Instrucciones página 70

10 | Anexo
70/78
Holder, set. To fix Interface and Woulff bottle on
lab stand
To fix Interface I-300 / I-300 Pro, VacuBox, LegacyBox
and Woulff bottle / valve unit on a lab stand, Rotava-
por® R-21x or Vacuum Pump V-7xx. Incl. holder for In-
terface and Woulff bottle, 2 M4x8 screws.
Holder. Wall mount, incl. support set
To fasten Interface on wall.
LegacyBox. Incl. accessory kit
Interface between Interface I-300 / I-300 Pro (with Va-
cuBox) to peripherals of older generations (Vacuum
Pump V-7xx, Recirculating Chiller F-1xx).
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of conden-
ser/secondary condenser. Placed on receiving flask.
Meant to be used with the Interface I-300 / I-300 Pro.
Power adapter. 30 V, 30 W, frequency 50/60 Hz
To power vacuum controller directly or to power interfa-
ce via LegacyBox or VacuBox.
Stand. V stand with rod, 600 mm
Used as a holder for interface or vacuum controller
when they cannot be mounted on a peripheral or wall.
Vacuum valve. Magnetic valve, 24V/4W, Mini-
DIN, 1.5 m
Flow valve without flask, meant to be used with a cen-
tralized vacuum source or an unregulated vacuum
pump. Meant to be used with the Interface I-300 /I -300
Pro.
Valve unit. Incl. Woulff bottle, 125 mL, P+G, hol-
der
Magnetic valve, meant to be used with the Interface
I-300/I-300 Pro. For operation with non-BUCHI vacuum
pumps or house vacuum.
Vapor temperature sensor. Incl. cap nut, seal
GL14
Measures the vapor temperature inside the system.
Meant to be used with the Interface I-300 / I-300 Pro.
Woulff bottle. 125 mL, P+G, incl. holder
For trapping particles and droplets and for pressure
equalization.
BÜCHI Labortechnik AG
N.º de pedido
11065362
11059132
11061166
11060954
11060669
048891
11060706
11061887
11060707
11059905
Manual de instrucciones Interfaz I-300
Figura