Publicidad
Idiomas disponibles
Idiomas disponibles
installation guide
Always use two people when setting up the base.
STEP 1
Place the bed base box in a desired location with the bottom
of the box facing up.
Remove the binding straps and packing materials, making
sure not to puncture the box with any sharp objects.
STEP 2
Remove the bed base from the box. Unfold the bed making
sure to keep the bottom of the bed facing upwards. Remove
all accessories and interior packaging and identify items
included in parts list above. Remove the clear protective
sheet from the soundbar.
8
STEP 3
To install Headboard Brackets (sold separately)
see instructions on page 18.
Legs are shipped fully assembled. To install the legs, check
to make sure all segments are assembled together tightly.
Alternative heights in 3" increments can be achieved by
removing leg segments from the top of the leg accessory.
Thread the leg into the frame, and tighten by hand. Do not over
tighten.
STEP 4
To sync two bases see detailed installation
instructions on pages 16-17.
It is recommended to leave the battery
backup strap attached to the power
supply for use when needed. 2 9V
alkaline batteries (not included) will be
required for its use.
Publicidad
