Publicidad
Idiomas disponibles
Idiomas disponibles
installation guide
STEP 11
Using the remote, move the head of
the base to its full upright position.
STEP 12
Confirm that the LED on the black
Tempur
Sleeptracker-AI
®
is blinking green. This may take up
to 90 seconds after connecting
power to the base. This indicates
that the processor is powered up
and ready to connect to a WiFi
network.
STEP 13
The customer should scan the
QR code on the remote control
packaging or on the rear side label
of the remote control to set up the
Tempur
Sleeptracker-AI
®
10
processor
®
or
App.
®
To complete the Smart Base setup, you will need to
download the Tempur
Sleeptracker-AI
®
in-app prompts. Once the app is connected, it will allow
access to the full functionality of your new Tempur Ergo
ProSmart
Base.
TM
Setup is now complete! Test all functions on remote.
IMPORTANT!:
For your safety, read the owner's manual carefully
and completely before operating this product. Electric shock
may occur if electrical components are not installed or operated
according to these guidelines.
App and follow the
®
Publicidad
