KNF LABOPORT SC820G Manual De Instrucciones página 155

Vacuum system SC820G / SC840G
Pump discharge 5. At the pneumatic outlet of the vacuum system, safely dis-
Translation of Originial Operating Instruction, KNF 339416-339418 02/23
4. Place the collection flask (4 and/or 5) on the separator
adapter (9) and/or on the condenser (2) and secure the
collection flask with the flask clamp (3).
Make sure that the flask clamp is firmly held in place by
tightening the flask clamp screw as far as it will go.
Fig.8: Mount collection flask
charge the pump discharge.
6. Install the coolant supply and coolant drain on the con-
denser (see 12).
7. Plug the plug of the power cable into a properly installed,
grounded socket.
Setup and connection
47
DE
EN
FR
ES
IT