Project Source 67686-1001 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Shut off the water supply and remove the old faucet.
Skip this step if install with side spray.
2. a. Push the plug (E) firmly upward and snap onto
the block (D).
b. Pull down moderately to ensure the connection
has been made.
Skip this step if install without side spray.
3. Remove the lock nut (H) from hose guide (G).
Mount the hose guide (G) into the far-right hole in
the sink. Secure the hose guide (G) underneath
the sink using the lock nut (H) and hand tighten.
1
2
3
4
D
E
G
H
A