Project Source 67686-1001 Manual De Instrucciones página 6

OPERATION INSTRUCTIONS
1. After the installation is complete:
a. Remove the aerator on the faucet (A).
b. Turn on the water supply and allow both hot
and cold water to run for at least one minute
each.
c. While the water is running, check for leaks.
d. Replace the aerator.
2. If it is necessary to remove the quick connector (1),
squeeze the tabs (2) on the quick connector and
then pull down to disconnect.
1
2
Squeeze
1
6
A
2
Pull
down
1