Project Source 67686-1001 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
4. Install the side spray:
a. Insert the side spray (F) down through the
hose guide (G) and into the sink.
b. From underneath the sink, push the
preassembled hose connector (I) firmly
upward and snap onto the block (D).
c. Pull down moderately to ensure the connection
has been made.
5. From under the sink, thread the mounting nuts (C)
onto the faucet (A).
Tighten the mounting nuts (C).
Note: Silicone sealant is required under the base
plate (B).
6. Connect a 1/2 in. IPS faucet connector or coupling
nuts (not included) with 3/8 in. O.D. ball-nose
risers (not included) to the water supplies
underneath the sink using wrenches (not included).
Note: Refer to the local plumbing codes for
permissible types of water supplyconnectors.
4
5
B
C
6
5
D
I
A
F
G