Max Min Function (500 Ms); Backlight Function; Display Function; Operation - Metrix MX 670 Manual De Instrucciones

3.6

MAX MIN function (500 ms)

To activate the MAX MIN function, press on the MIN MAX
PEAK button. The MIN value is then displayed. (the MIN
symbol is displayed steady; the MAX symbol is displayed
flashing)
By pressing again on the key, the MAX value will be displayed
(the MIN symbol is displayed flashing; the MAX symbol is
displayed and steady).
By pressing the key again, the clamp returns to normal mode.
3.7

BACKLIGHT Function

By pressing the
button, the backlight of the display goes
on, press again, it goes off.
The "auto power off" function activates after 3 minutes.
3.8

DISPLAY Function

When measuring voltage or AC current, pressing the
DISPLAY key replaces the nature of the secondary display by
the signal frequency of the main display. Pressing again
returns to the previous display.
In temperature measurement, pressing the DISPLAY key
switches the displays in degrees Celsius and degrees
Fahrenheit of the measured temperature.
4

OPERATION

4.1

AC voltage measurement

• Position the switch on V .
Connect the red test lead to the
"+" terminal and the black test
lead to the "COM" terminal.
Put the touch prods in contact
with the measurement points
under AC voltage.
Read
measurement on the display.
26
the result of the
MX670 / MX675