Daikin BRC1H71W Manual De Instrucciones página 10

Securing the back plate
Wall installation
1 : Take the drywall screws and drywall anchors out of the accessory bag.
2 : Mount the back plate to a flat surface.
Drywall screws
In case of installing in the electrical component box
2
1 : Take the screws for the mounting plate (M3×10 and M4×40), and the mounting plates
(metal and plastic) out of the accessory bag.
2 : Attach the mounting plate (metal) to the electrical component box with the screws for
the mounting plate (M4×40).
3 : Attach the back plate and mounting plate (plastic) with the screws for mounting plate
(M3×10).
CAUTION
• For the installation surface, select as flat a location as possible.
• Choose a place where there is no gap between the wall and the screw fixing part of the back plate.
• If there is an empty space between the back plate and the screw fixing part (nut part) due to the
structure of the wall, install with a torque of 20 N · cm or less.
If it is tightened too much, the back plate will be deformed and the upper casing will come off easily.
• If the upper casing comes off easily, loosen the drywall screws to lessen the deformation.
• If tightened too much, the back plate will be deformed and the upper casing will come off easily.
If the upper casing comes off easily, loosen the screws and correct the deformation.
8
3
Drywall anchors
English