Publicidad
Idiomas disponibles
Idiomas disponibles
EN
This User Manual has been translated for your
convenience using machine translation. Reasonable
efforts have been made to provide an accurate
translation; however, no automated translation
is perfect nor is it intended to replace human
translators. The official User Manual is the English
version. Any discrepancies or differences created in
the translation are not binding and have no legal
effect for compliance or enforcement purposes. If
any questions arise related to the accuracy of the
information contained in the User Manual, please
refer to the English version of those contents which
is the official version.
TECHNICAL DATA
Parameter description
Parameter value
Product name
Brake and clutch
bleeding system fluid
bleed tool
Model
MSW-PVC-02
Capacity [l]
3
Maximum working pressure
4
[bar]
Working pressure [bar]
2
Dimensions [width x depth
200x200x510
x height; mm]
Weight [kg]
1,4
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
6
U S E R M A N U A L
CAUTION! The figures in this manual are illustrative
only and may vary in some details from the actual
appearance of the product.
2. USAGE SAFETY
ATTENTION!
Read
all
safety
warnings
instructions. Failure to follow warnings and
instructions could result in serious injury or even
death.
The term "device" or "product" in the warnings and in the
description of the instructions refers to: Brake and clutch
bleeding system fluid bleed tool
2.1. SAFETY IN THE WORKPLACE
a)
Keep the work area tidy and well lit. Disorder or poor
lighting can lead to accidents. Be foresighted, watch
what you are doing and use common sense when
using the unit.
b)
If you have any doubts as to whether the product
is working properly or if it is damaged, contact the
manufacturer's service department.
c)
Only the manufacturer's service department may
repair the appliance. Do not attempt to repair the
product on your own!
d)
Keep this manual for future reference. If the unit
is to be passed on to third parties, the operating
instructions must also be handed over together with
the unit.
e)
Keep packaging components and small installation
parts out of the reach of children.
f)
Keep the device away from children and animals.
g)
When using this product together with other devices,
also follow the other instructions for use.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not operate this device if you are tired, ill or under
and
the influence of alcohol, drugs or medication that
could impair your ability to operate the device.
b)
The device is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or persons who lack experience
and/or knowledge unless they are supervised or have
been instructed by a person responsible for their
safety on how to operate the device.
c)
Please be attentive and use common sense when
operating this equipment. A moment's inattention
during operation may result in serious personal injury.
d)
Use the personal protective equipment required
when working with the device, as specified in point
1. "Explanation of symbols." The use of appropriate,
approved personal protective equipment reduces the
risk of injury.
e)
The product is not a toy. Children should be watched
to ensure that they do not play with the appliance.
2.3. SAFE USE OF THE DEVICE
a)
Do not overload the device. Use tools that are suitable
for the application. A correctly selected unit will do a
better and safer job for which it was designed.
b)
Keep unused product out of the reach of children
and anyone unfamiliar with the device or this manual.
Products are dangerous when used by inexperienced
users.
Rev. 18.03.2021
c)
Keep the product in good working order. Check
before each use for general damage or damage to
moving parts (cracks in parts and components or any
other condition that may affect the safe operation
of the device). If damaged, have the device repaired
and
before use.
d)
Repairs and maintenance should be carried out by
qualified personnel using only original spare parts.
This will ensure the safety of use.
e)
To ensure the designed operational integrity of the
device, do not remove factory-installed covers or
loosen screws.
f)
Clean the device regularly to prevent permanent dirt
build-up.
g)
Do not tamper with the device to alter its performance
or design.
h)
Keep the unit away from sources of fire and heat.
i)
Do not exceed the maximum permissible operating
pressure of the unit!
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed to check pressurized cables, refill and
replace brake fluid and bleed the brakes.
The user is liable for any damage resulting from
unintended use of the device.
3.1. PRODUCT OVERVIEW
1
4
1.
Bleeding device
2.
Container for old fluid
3.
Nut adapter for the brake fluid expansion tank
4.
Pump pressure relief valve
Rev. 18.03.2021
3.2. WORKING WITH THE DEVICE
FILLING
1)
Make sure that there is no pressure in the device.
The pressure can be released by means of the valve
located on the side of the pump.
2)
Unscrew the cap on the top of the unit and fill the unit
with new brake fluid. Make sure that no old fluid or
debris remains in the tank.
HANDLING
1)
Install the adapter (3) on the brake fluid expansion
tank.
2)
Connect the adapter with a hose to the bleeding
device(1).
3)
Connect the old fluid container (2) with all accessories
attached to the brake calliper bleed screw.
Pour the new brake fluid into the refilling tank of the
bleeding device, and then pump with the handle to
build up the correct pressure in the tank (2-3 bar).
Important: If it is necessary to build up over 3 bar
pressure in the pump to replace the brake fluid, you
must first check the brake system for possible damage
and leaks.
Unscrew the brake calliper breather - this will make
the new fluid flow from the instrument to the brake
system, and at the same time the old fluid will flow
into the used bottle along with air trapped in the
system (bubbles).
When you can see that the new fluid is flowing onto
the old one in the bottle and no air bubbles come out
of the vent, close the brake vent.
Repeat the process for all other wheels - starting with
the wheel furthest away from the master cylinder and
then ending with the wheel closest to the master
cylinder.
Note: Brake fluid should be added to the correct level.
Too much or too little fluid has a negative effect on the
operation of the braking system and, consequently,
driving safety.
4)
When the process is complete, release the pressure by
pressing the vent valve on the side of the pump. After
releasing, disconnect the fluid supply hose from the
adapter on the master cylinder.
Note: Do not disconnect the adapter until the pressure
is released.
5)
If necessary, refill the brake fluid in the tank to the
maximum level - see the scale on the expansion tank
2
for the brake servo. Install the expansion tank cap on
the master cylinder.
6)
Safely dispose of the used brake fluid.
Note: the brake fluid is harmful to the paintwork of the
vehicle and toxic to the environment!
NOTE
Be especially careful when working with brake fluid. It is
corrosive and highly poisonous to the environment. If it is
spilt on the paintwork, it should be washed quickly with
e.g. gasoline and wiped dry; otherwise, it will permanently
3
damage the surface. The same goes for plastics. Wear
safety glasses and gloves to avoid skin contact.
Only new brake fluid may be used, used brake fluid or
other fluids will contaminate the system and may lead to
a decrease in its performance and even cause the brake
system to fail.
EN
7
Publicidad
