Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk VHC200 Manual De Instrucciones

VHC200 / VHC200EXP

Vacuum Cleaner Parts and Labels

1. Identification plate which includes:
Model Code, Technical Specifications (see table on page 7),
Serial no. CE Marking, Year of manufacture
2. Dust container
3. Dust container release lever
4. Inlet
5. Outlet
6.
Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
off (see also par. "Primary filter shaker").
7.
Pneumatic system connection fitting.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4 - Fig. 1) and blown out through the
outlet (5 - Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the recommended hoses are given in the
technical specifications table.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common
types of dust, the vacuum cleaner can be fitted with a HEPA
filter with a higher filtering capacity for fine dusts and dusts
that are hazardous to health.
US
C396

Vacuum cleaner description

Figure 1

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Model
A (in)
B (in)
C (in)
Weight with packing
(lbs)
4
Figure 2
VHC200 VHC200EXP
27.6 27.6
47.2 47.2
66.9 66.9
196 196
03/2015