MicroPower CHAMP 2A1A3 Serie Manual Del Usuario página 5

GENERAL PROTECTIVE MEASURES
CAUTION
RISK OF MATERIAL DAMAGE! - Read and follow the precautions provided below:
.
• Do not disconnect the battery when the charging process is in progress. Arc flash may occur and damage the connector pins.
Always stop the charging process before the battery is disconnected
• Do not keep inflammable material close to battery charger
• Before connection, check the marking on the battery and the battery charger
• Do not charge non-rechargeable batteries, damaged batteries or battery types not intended for the charger
ELECTRIC SHOCK
WARNING
RISK OF ELECTRIC CHOCK! - Read and follow the precautions provided below:
WARNING, risk of electric shock. High voltage inside. The battery charger contains voltage at a level that can cause
personal injury.
• Disconnect the battery and power supply before maintenance, servicing or dismantling
• Check that the power supply at the site of the installation complies with the rated voltage specified on the battery charger's data
label
• The battery charger may only be connected to a power outlet with protective earth
• Do not operate the charger if there is any evidence of damage
• If the supply cord or plug is damaged
• The manufacturer, its service agent or similary qualified person must carry out any replacement of the cord / plug in order to
avoid a hazard
• Appliances with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its
service agent
• Other appliances that have a supply cord that cannot be replaced, should be scrapped
• If a stationary appliance is not fitted with a supply cord and a plug, or with other means for disconnection from the supply mains,
disconnection must be incorporated in the fixed wiring in accordance with the national wiring rules
WARNING
Risk of electric shock. High output voltage. Do not touch uninsulated battery terminals, con- nectors or other live electrical parts.
When installing or performing work on battery, charger and battery terminals - do not risk short circuits. A short circuit may cause per-
sonal injury and permanently damage the battery. For all work on battery chargers, batteries and BMS, suitable insulated tools must be
used.
Warning information
Hazardous situations and precautions are presented in the text as follows.
WARNING
Indicates a potentially dangerous situation. Death or serious injury may occur if appropriate precau- tions are not taken.
CAUTION
Indicates a situation where damage or injury could occur. If it is not avoided, minor injury and/or damage to property may result.
5
5