Steinberg Systems SBS-LCC-3000 Manual De Instrucciones página 28

s) Do not allow water to freeze in the unit.
t) Replace the coolant if the unit's performance has deteriorated or if the
refrigerant has become viscous.
u) Only qualified persons should perform maintenance on the unit.
High-pressure gas is present in the unit.
v) Do not operate the unit's pump with an empty tank, when the liquid level is
too low or when the liquid is frozen.
w) Always turn off the unit before opening the cover.
x) Do not pour corrosive, explosive or other substances into the unit.
y) Do not start cooling or circulation if the unit has an empty tank or the liquid
level is too low.
CAUTION! Although the product has been designed to be safe, with adequate
safeguards, and despite the additional safety features provided to the user,
there is still a slight risk of accident or injury when handling the unit. You are
advised to use caution and common sense when using this product.
3. Rules of use
The unit is designed to control and maintain a specific temperature by circulating
fluid through the system.
The unit can be connected to electron microscopes, lasers, distillers, and other
laboratory equipment requiring appropriate operating conditions.
The user is responsible for any damage resulting from misuse.
3.1.
SBS-LCC-3000
Description