Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.3. Advanced settings
The device allows you to edit internal parameters of temperature
measurement.
To enter the internal parameters setting mode press and hold the
settings button (H) for over 3s.
The display screen will show "LC", which is a protection (password)
against uncontrolled change of parameters.
Use the buttons (G) and (F) to edit the parameter value, and confirm
your choice by pressing the setting button (H).
If the password is incorrect the display will return to the main screen,
if correct it will go on to edit the parameter settings described in the
table below.
Press the settings button (H) to move between the parameters, edit
the parameter values with the buttons (F) and (G).
Press and hold the settings button (H) for more than 3 seconds to
save the settings and return to the main screen.
Symbol
Name
Password
Lc-
Deviation
cL-
Function description
"Lc=3" - parameter
values can be viewed
and modified
If the difference
between the measured
value and the setpoint is
greater than or equal to
Factory value
(range)
0
2.0
(0.0～50.0℃)
Publicidad
