Hydrofarm PARsource PHANTOM DE 60 Serie Instrucciones página 11

• • • • •
•
• • •
• • •
• •
• • • •
•
•
• •
• •
•
LED INDICATOR KEY
Possible Reason
Bad lamp
Lamp not installed properly
Lamp / ballast incompatibility
Inconsistent current
Lamp not "burned in"
Old lamp/excessive use of lamp
Possible wrong lamp type for
ballast
Incorrect wattage for ballast
No power
Bad fuse/circuit
Bad ballast (failure)
How to Diagnose
Place a known working lamp in the ballast.
If it does not flicker or have erratic start,
the original lamp is bad.
Check to see if lamp is properly and
securely installed.
Try another lamp brand.
Electronic ballast: Is the line conditioned.
"Burn in" (run the lamp for 24 hours).
Check the rated hours:
Has it been run 60% of the rated hours?
If yes, try a new lamp.
Try another lamp type or confirm proper
ballast for lamp type.
Confirm proper wattage for ballast and
lamp .
Check circuit panel and power cord
connections.
If on panel, replace. If on the ballast,
replace .
Place lamp in known working ballast.
If the lamp works, the ballast is bad.
11