WARNINGS
• Do not connect any other device to the Control Port. Any attempt to connect it to an unrelated
device or control it with an incompatible controller may result in damage to the ballast and will
void the warranty. Contact Hydrofarm or PARsource for integration with commercial greenhouse
environmental control systems.
• Use this ballast in greenhouses or indoor applications only. Position it in an area away from
excessive heat or contact with liquids.
• This ballast does not rely on the luminaire enclosure for protection against accidental contact
with live parts.
• Disconnect the ballast from the power supply before performing any maintenance, lamp changes,
or other modifications.
• Contact the place of purchase for service if the ballast does not work after confirming the power
connection, output connection, and lamp operation.
• Opening the ballast will void the warranty.
• This product may cause interference to radio equipment and should not be installed near
maritime safety communications equipment or other critical navigation or communication
equipment operating between 0.45–30 MHz.
• If using with a generator, line conditioning equipment must be used to control input voltage in
order to avoid damage to the ballasts. Contact us for more information.
BALLAST OVERVIEW
5