Publicidad
Idiomas disponibles
Idiomas disponibles
19. Camshaft Timing Checking Pin - GOLD
Install the Camshaft Locking Pins:
LR/Jaguar 2.7TDV6 - Insert 1 x (D) in the left hand
camshaft/sprocket (Fig.7), and 1 x (C) in the right hand
camshaft/sprocket.
LR/Jaguar 3.0 TDV6 und PSA 2.7/3.0D HDi
Stecken Sie 1 x Nockenwellen-Arretierstift (D) in das linke
Nockenwellenzahnrad und den anderen Nockenwellen-
Arretierstift (D) in das rechte Nockenwellenzahnrad.
NOTE: Reference to left hand or right hand camshaft is as
viewed when looking directly at the camshaft sprockets. Check
that the belt tensioner is in the correct position - the mark
(casting mark) on the tensioner can be seen through the 'cut out
notch'.
20. If it is not possible to insert the Camshaft Locking/Checking
Pins, repeat the belt replacement procedure.
NOTES
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
