SICK G6L Instrucciones De Operación página 7

2.2 Intended use
3 Product description
3.1 Operating and status indicators
8025390.1CGF/2021-07-13 | SICK
Subject to change without notice
LASER CLASS 1
Laser
1
EN/IEC 60825-1:2014
Maximum pulse power < 3.9 mW
Puls length: 3 µs
Wavelength: 670 - 690 nm
Complies with FDA performance
standards except for conformance with
IEC 60825-1 Ed. 3,
as described in Laser Notice No. 56,
dated May 8, 2019
ATTENTION
WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure
due to laser radiation.
The GSE6L is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects. A sender
(GS) and a receiver (GE) are required for operation. If the product is used for any other
purpose or modified in any way, any warranty claim against SICK AG shall become void.
GSE6L-xxx1x
3
2 3
1
1
Potentiometer: sensitivity adjustment
1
Yellow LED: status of received light beam
2
Green LED: Supply voltage active
3
GSE6L-xxx3x
Sensor which it is not possible to set: The sensor is adjusted and ready for operation.
OPERATING INSTRUCTION
2
O P E R A T I N G I N S T R U C T I O N | GSE6L
en
7