SISER Romeo Manual Del Usuario página 10

5
Remove all protective packaging from cutter and
1
accessories, including plastic wrap.
Plug the round end of the power cord into the DC
2
power port on the rear of the machine, then plug the
opposite end into a standard electrical outlet.
Press the power button to turn the cutter on.
3
4
ROMEO
Set up your cutter online at
setup.siser.com
Get the Leonardo Design Studio
monthly subscription for free with your
cutter purchase
OR SETUP MANUALLY USING THE
FOLLOWING INSTRUCTIONS
Carefully remove 45° blade from
packaging and insert into socket
on blade housing with the
pointed side facing outwards.
Twist the upper screw of the blade
housing clockwise to expose less of
the blade, or counterclockwise to
expose more of the blade. The
ideal length of exposed blade is
about a credit card's width. Once
the blade is properly adjusted,
twist the inner screw to lock in the
blade position.
SETUP
™
basic
TM