SISER Romeo Manual Del Usuario página 7

2
Siser SRL is not liable for damages, losses, injuries or consequential damages
resulting from acts, changes or other use of the transfer press not authorised
by a prior written consent from Siser SRL.
All mounting, maintenance and repair work must be performed only by skilled
and specially trained electricians.
It is strictly prohibited to remove or manipulate any kind of safety appliances.
The working area must be clean, tidy and free of any obstacles for manoeu-
vring the cutting machine.
All general instructions for operation and all safety instructions must be strictly
followed to avoid any injuries that might result from the use of this cutting
machine and to ensure a successful utilisation.
The electrical connections must comply with local regulations.
Before mounting the cutting machine prepare a suitable mounting location.
Handle the package containing the cutting machine with care and with the
aid of suitable tools. For the mounting location you need a stable table with a
height of approximately 70 cm.