SISER Romeo Manual Del Usuario página 12

7
Cut not deep enough
and can't be weeded
9
Once you're ready to cut, plug in the USB flash drive
via the USB-A port on the rear of the cutter. Tap the
'Settings' button, then 'USB'. Select your cut file*
from the drop down.
*Visit siser.com for info on accepted file types
10
Congratulations! You've cut your first design! To learn
how to apply your design, visit www.siser.com
Access advanced designer tools, inspirational projects,
Identifying a Good Test Cut
Material and carrier
Ready to use your cutter to its full potential?
tutorials, and more by downloading
Leonardo Design Studio
cut through
Move the position of the
blade by using the
SETTINGS
on-screen arrow buttons.
CUT SETTINGS Once the blade is in
position, tap the play
TEST CUT
button to begin cutting.
Material cut and
carrier not cut through
.
TM