Fig. 5
Example of type plate
en
The appliance must be disposed of once it has reached the end of its service life (see
Section "Disposal").
Maintenance including - amongst other things - the replacement of all wear parts
must be carried out after 6 years. Non-compliance with this deadline will invalidate the
warranty provided by TESCOM EUROPE. The safety and function of the appliance can
only be assured subject to maintenance being carried out by TESCOM EUROPE or an
authorised company and provided that original TESCOM EUROPE spare parts are used.
Compressed gas cylinders:
Compressed gas cylinders must undergo repeat testing by a certified testing agency at
regular intervals. Before using a compressed gas cylinder, check that the date for such
repeat testing has not elapsed. Compressed gas cylinders whose date has elapsed must
not be used. Repeat testing dates are stamped on compressed gas cylinders.
6.4
Warranty, customer service and dispatch
All products purchased from TESCOM EUROPE GmbH & CO. KG are covered by the
statutory warranty from the date of purchase.
The warranty obligations and liability of TESCOM EUROPE GmbH & CO. KG for any
consequences are excluded in the following cases:
•
Operation after the end of service life
•
Non-compliance with the instructions for use
•
Use for any other than the intended purpose
•
Operating errors
•
Improper use or handling
•
Negligence
•
Tampering with the pressure regulator by unauthorised third parties, e.g. opening
the appliance or replacing connection pieces
•
Act of God
•
Damage during transport caused by improper packaging
•
Failure to maintain the appliance
•
Failure to use original spare parts
Year of manufacture
62
Month of manufacture